===Schlumberger===
.....[Contd]
===Phillips Petroleum Company===
[http://patft.uspto.gov/netacgi/nph-Parser?Sect1=PTO1&Sect2=HITOFF&d=PALL&p=1&u=%2Fnetahtml%2FPTO%2Fsrchnum.htm&r=1&f=G&l=50&s1=5054554.PN.&OS=PN/5054554&RS=PN/5054554 US5054554A] titled "Rate control method for hydraulic fracturing" by Phillips Petroleum Company. Production of fluids from the fractured zone or area is more a function of fracture conductivity in high permeability reservoir, hence increased fracture length is not as important as increased fracture width. Therefore a need exist to provide a fracture which will maximize the production of hydrocarbon fluids from earth formations having moderate to high permeability by increasing the fracture width. It provides an improved method of hydraulic fracturing of formations to produce hydrocarbon fluids by controlling the rate of injection to form the desired fracture length and width in moderate permeability and high permeability formations.
===Union Oil Company===
[http://patft.uspto.gov/netacgi/nph-Parser?Sect1=PTO1&Sect2=HITOFF&d=PALL&p=1&u=%2Fnetahtml%2FPTO%2Fsrchnum.htm&r=1&f=G&l=50&s1=5472050.PN.&OS=PN/5472050&RS=PN/5472050 US5472050A] titled "Use of sequential fracturing and controlled release of pressure to enhance production of oil from low permeability formations" by Union Oil Company. Under current economic conditions, there is a need for a more efficient process for producing oil from low permeability formations. Recovery of hydrocarbon from a low permeability formation is increased by fracturing the formation and avoiding the release of pressure from the fracture to lengthen the time so that the reservoir pressure remains above the fracture collapse pressure.
A method for producing hydrocarbon from a hydrocarbon-containing subterranean formation, includes the steps of
- drilling and casing a wellbore which penetrates the subterranean formation, perforating the casing to form set of perforations, fracturing the subterranean formation with water, steam or gas through the set of perforations; producing the hydrocarbon from the formation through the set of perforations while restricting the release of pressure from the fractured formation to lengthen the time that the reservoir pressure remains above the fracture collapse pressure; and repeating the steps till satisfactory results are produced.
The release of pressure from the formation by regulating the rate at which oil is pumped using control valves from the formation.
===Information from the Article===
Many authors have talked about massive hydraulic fracturing <u>Ahmed et al</u>. in 1979, <u>Hanson, in 1981 </u>and <u>Schubarth et al. in 2006</u>. '''Massive hydraulic fracturing '''(MHF) is a primary candidate for stimulating production from the tight gas reservoirs in the U.S. MHF is a more recent application that differs from hydraulic fracturing in that more fluid and proppant are pumped to create more extensive fractures in the reservoir. Application of MHF to increase production from the tight reservoirs has provided mixed and, in many cases, disappointing results especially in lenticular reservoirs (<u>Hanson,1981</u>)... [Contd]
